A dehumidifier controls the level of moisture in the air which is important for allergies and general health. If your house is damp and relative humidity level too high you may have serious issues. Not only can mould develop but also dust mites can proliferate in carpets and mattresses.
Dehumidifiers remove excess moisture from the air, helping to disable mould growth. They allow you to control humidity and in turn keep dust mite allergens down, remove damp and keep mould under control. They prevent furniture and upholstery from absorbing excess moisture reducing mildew and mould growth.
For more information read our Quick guide to choosing a dehumidifier. If you need any help, our friendly expert advisors will be pleased to help you on 01453 752216.
How to select the right dehumidifier for your needs
Did you know one load of washing can release up to two litres of moisture into the air which can create an ideal breeding ground for mould spores and dust mites?
A dehumidifier helps to control the levels of moisture in the air and prevents the build up of mould creating a healthier environment for you and your family.
A dehumidifier helps to reduce humidity levels preventing allergens such as dust mites and mould.
In turn dehumidifiers help ease your breathing and reduce irritation to your skin.
By installing a unit you can help reduce odours that can accompany mould and help to alleviate that musty smell which can be found in older properties.
If you’re suffering from the following symptoms; stuffy nose, itchy or watery eyes, sneezing, wheezing or difficulty breathing or skin rashes
High levels of humidity in rooms with bad ventilation especially in areas like bathrooms, shower rooms or laundry rooms.
Condensation on the windows and small black spots growing on areas in your bathroom
Water stains on the walls or ceilings
A general stale or musty smell around the house
What is the difference between moisture removal and tank size?
The moisture removal of each model is defined as the number of litres of moisture that can be removed in a 24-hour period.
Always check the moisture removal capacity against the tank size. If you choose a dehumidifier with the capacity to remove up to 20 litres a day and a tank size of 6 litres, the maximum moisture that will be removed is 6 litres until the tank is emptied and the machine gets going again.
Some models have tanks with a cover that stops the water spilling out. All our machine have an automatic shut off when full. There is also a timer on some models.
What is continuous drainage?
Most dehumidifiers offer a continuous drainage option. If you can locate your dehumidifier close to a drain, or sink, the unit will continue to drain saving you the effort of emptying the unit as and when it is full. Even in an environment that is not obviously overly damp, you may find that a two litre tank fills up at least once a day.
If you’re forced to dry your wet washing indoors a dehumidifier with laundry mode will help remove excess moisture quickly and effectively.
The laundry mode increases the fan speed so the air in the room becomes drier. This allows the laundry to dry faster cutting down the time moisture is in the air.
The desiccant models tend to be quieter to operate than the regular compressor models as they operate in a similar way as a refrigerator with a pump.
Traditional compressor models work in the same way as a refrigerator. Refrigerant is pumped around a series of pipes causing some pipes to be very cold and some to be hot.
A fan blows the incoming air over the cold coil causing the moisture in the air to condense and freeze on the pipes. Then the dry air is blown past the hot pipes and is warmed up. At a regular interval the system is reversed so the pipes defrost and the water is collected in the tank for disposal. While it is defrosting the dehumidifier is not dehumidifying.
A compressor model is ideal for moderate to high humidity levels.
Desiccant dehumidifiers use a desiccant material, which acts as a drying agent. Ithas a round disk that is made of zeolite that rotates slowly and also vibrates.
As it vibrates water molecules in the air condense onto the disk. At the top of the disk the moist air is blown by a fan and moisture is removed. At the bottom of the disk warm air is blown past the disk and the water is blown off the disk and is collected in the tank. The air that is expelled into the room is warmer than the inlet air by 10 to 15 degrees.
As these units do not require a compressor they are lighter and quieter. As a consequence as they do not work through refrigeration it means they are more efficient at low temperatures making them suitable for sheds, boats and other places which tend to be below room temperature.
The size of a dehumidifying unit is generally based on the amount of moisture extracted from the air in 24 hours. It is advised you purchase a larger capacity model over a smaller one because larger units can dehumidify more area in a shorter amount of time.
When considering the size also think about where it is going to stand in your home as it needs to be placed in an area where the air movement is not restricted.
The dehumidifier will be there for a long time so you don’t want it to be in the way.
A regular compressor dehumidifier will operate in the 5°C to 30°C range. The warmer the weather the faster the dehumidifier will collect moisture. When a compressor type dehumidifier is defrosting it uses the ambient temperature to melt the ice on the coils.
Desiccant dehumidifiers operate on a different system with the wheel being dried out using hot air so again it will operate down to just above 0°C.
These units are useful for caravans, boats or summerhouses which are not inhabited all the time and where the temperature may drop in cooler weather.
The louvres distribute the dried air to the front and top of the machine so the air is spread evenly around the room. This allows the unit to distribute the air more widely so there are fewer dead spaces where there is no air movement.
Some dehumidifiers have basic filters that will remove large particles from the air to stop the particles being sucked into the unit.
Some models coat this filter with nano silver (very small particles). This kills any bacteria or viruses that are drawn into the machine and cleans the air that is expelled back into the room.
A manual control is basically a knob that turns that will go from low to high and continuous operation. The higher the setting the more moisture is removed and the lower the humidity in the room. The manual control machines are usually the basic units and often have one fan speed.
The electronic control units are more sophisticated units that can offer more operating options. Options can include pre-set humidity levels. There can also be an option of a timer. Many units have one fan speed but some may have up to three fan speeds for faster drying.
Most dehumidifiers have castors to allow for easy movement of the unit. They can be quite heavy and castors can be very useful if you are moving the unit around to different areas. However, we would recommend the unit is placed in a central location, such as a hallway or landing, allowing moisture from the surrounding rooms to flow towards it.