For use on interior and exterior woodwork and primed or previously painted metal. Ecos satin gloss will key to most finishes but a test area is advisable. On bare wood use the three tier system - High Opacity Wood Primer, Undercoat and then the gloss or satin gloss. On previously painted wood, bare iron or steel, prepare with the Ecos undercoat.
For knots treat with Shellac Knotting and for filler, treat with Ecos Filler Sealer. Coverage is approximately 10m²/l per coat on hard, non-porous surfaces. Best results can normally be achieved with two coats. The satin gloss is slightly less shiny than the gloss and is not suitable for exterior use. Use a good quality brush or gloss roller. White sample pots available